how to set up plantronics headset

Introduction

To set up your Plantronics headset, you'll need the following:

Have the user hold down the "Mute" button while rehearsing the following steps

  • Hold down the "Mute" button while rehearsing the following steps. The mute light should be flashing.

  • Plug the other end of the USB cable into your computer or external power source and have the user press "Play/Talk."

#1. Hold down the "Mute" button on the control box

  • Hold down the "Mute" button on the control box.

  • The mute light should be flashing.

  • Plug the other end of the USB cable into your computer.

#2. The mute light should be flashing when held down

There are two ways to mute your headset: One is by pressing the mute button on your wireless device directly, and the other is by holding down the center button (Mute) on our control box. Using a wired headset, you can press the mute button on your control box instead of holding it down.

The Mute light should flash when held down for 5 seconds, indicating that your call has been muted.

#3. Plug the other end of the USB cable into the computer

  • Plug the other end of the USB cable into the computer.

  • Plug the control box into an electrical outlet near your desk, and then plug its power cord into an electrical outlet.

The Plantronics headset is now plugged in, and you are ready to make calls.

Now that you have completed the steps above, your plantronics headset is ready for use. You can now listen to music and make calls using this device. The headset may also be used for other applications, including video calling, gaming, and more.

Conclusion

Please contact our customer service team if you have any questions about setting up your Plantronics headset.

 

0
0 ratings